What shop owners ask us about lifts
Short, plain answers on inspections and the rules, buying a lift, planning the bay, and keeping lifts running.
Inspection and compliance
- Your hoist inspection has run out. Now what?If a lift's last examination was more than a year ago, it is past the yearly minimum in Ontario's regulation. The fix is to book the inspection and get a signed record back on file.
- Ministry of Labour inspections: what applies to your liftsShop hoists are a Ministry of Labour matter in Ontario, not a TSSA one. Here is what the Act lets an inspector do, and the parts of Regulation 851 that apply to lifting devices.
- Orders, stop work and fines: what Ontario's Act saysWhen an inspector finds a contravention, the Act lets them order it fixed, and in some cases order that equipment not be used. This page quotes those sections and the penalty section word for word.
- Does your insurance care whether a lift was inspected?Only your broker and your policy can answer that. What you can do is ask the right questions and have the records ready that answer them.
- What our annual lift inspection coversOne visit covers every lift in the shop. Each lift is inspected to ANSI/ALI ALOIM:2020 and recorded separately.
- ANSI/ALI ALOIM:2020, explained plainlyALOIM is the industry standard for how automotive lifts are operated, inspected and maintained. Ontario's law sets the yearly examination and the signed record. ALOIM describes how the job is done properly.
- The lift records Ontario's regulation says to keepRegulation 851 asks for a signed record of every lift examination, kept long enough that the two most recent are on file. A new lift comes with its own paperwork too.
- Warning signs that mean stop using the liftIf a lift starts doing something new, stop using it and call. This page lists the signs to watch for. It is not a repair guide.
- What sets the cost of a hoist inspectionThe biggest thing that sets the cost of a yearly lift inspection is how many lifts you have. Clear bays and what the inspection finds matter too. Call for a quote for your shop.
- When a lift goes down or won't come down mid-jobKeep everyone clear and don't go under the vehicle. Don't try to force the lift. Call 647-222-2033.
Buying a lift
- Buying your first two-post liftA two-post is the everyday repair lift, and the right one depends on your vehicles and your bay more than the brochure. Settle these choices before you compare quotes.
- New or used liftA used lift is a fair option, and they come up when shops close, renovate or upgrade. Compare the whole installed job, not just the sticker.
Planning the bay
- Ceiling height by lift typeCeiling height decides which lift can go in a bay. The number that matters is clear height to the lowest thing over the lift, not the roof deck.
- Concrete requirements for a liftAn anchored lift is only as good as the concrete under it. Every maker publishes its own minimums, so the exact model sets the numbers.
- Single-phase or three-phase power for a liftMost commercial lifts run on 220 volt single-phase power, and some models can be ordered with a three-phase power unit. Know what your building has before you order.
- Planning a multi-bay shop layoutWith several bays, where one lift goes shapes the next. Plan the whole floor once, before the first lift is bought.
Running and maintaining lifts
- Lift cables and chains: when they get replacedCables and chains carry or level the load on many lifts. The manufacturer's manual sets how often they are checked and when they come out.
- Hydraulic fluid leaking from a liftHydraulic fluid on the floor or on the lift can mean a leak in the system. Treat it as a reason to stop the lift, not a reason to top up and carry on.
Sticker running out?
Book your annual inspection. We inspect every lift in the shop in one visit, with a signed record for each.