Skip to content
Smart LiftingSYSTEMS

Planned maintenance that keeps lifts working

We do routine maintenance on vehicle lifts of pretty much any brand. The manufacturer sets the schedule, and planned visits deal with wear between yearly inspections.

What a planned service visit covers

Inspected to ANSI/ALI ALOIM:2020 by experienced hoist technicians.

  • A service plan set to each lift manufacturer's schedule
  • Wire rope and chains examined
  • Locks and lock releases checked and adjusted
  • Lubrication with the lubricants the manufacturer specifies
  • Hydraulics checked for level and leaks
  • Synchronisation and levelling adjusted
  • Worn parts flagged and quoted before they fail

Quoted before the work starts

A planned service visit for each lift, on the manufacturer's schedule. Call for a firm figure.

Maintenance and inspection are different jobs

The annual inspection is the examination Ontario Regulation 851, section 51(1)(b), calls for "at least once a year, and a record shall be kept, signed by the competent person doing the examination". Maintenance is the regular service in between.

The lift's manufacturer sets how often it needs service, whether that is monthly, every six months, yearly or on some other basis.

The manufacturer sets the plan

ANSI/ALI ALIS, the North American standard for lift installation and service, says planned service follows the lift manufacturer's recommendations, both for what gets done and how often.

The standard also calls for regular examination of the wire rope and chains that carry or synchronise the load.

Why it pays

Cables, chains, locks and hydraulics wear with use. Dealing with that wear on a visit you booked is easier than a lift that stops mid-job.

What does a day with that bay down cost you?

What to have ready when you call

These help us build the right plan for each lift.

  • How many lifts you have, and what types
  • Make and model of each lift
  • The manufacturer's manual, if you still have it
  • Your last service and inspection records

Common questions

Is maintenance the same as the annual inspection?

No. The annual inspection is the examination Ontario Regulation 851, section 51(1)(b), calls for "at least once a year, and a record shall be kept, signed by the competent person doing the examination". Maintenance is planned service that follows the manufacturer's schedule to keep the lift working between inspections. A lift needs both.

How often should a lift be serviced?

As often as the lift's manufacturer recommends. ANSI/ALI ALIS, the North American standard for lift installation and service, says planned service frequency follows the manufacturer, whether that is daily, weekly, monthly, semi-annually, annually or some other basis.

Do you maintain lifts from other brands?

Yes. We repair and service vehicle lifts on pretty much any brand, from routine maintenance to a lift that isn't working the way it should.

What parts do you use when something is worn?

Worn, damaged or broken parts are replaced with parts approved by the lift's original manufacturer, or parts that meet the original manufacturer's specs, as ANSI/ALI ALIS calls for.

Sticker running out?

Book your annual inspection. We inspect every lift in the shop in one visit, with a signed record for each.