Lift repair for shops that need the bay back
We repair vehicle lifts on pretty much any brand, from a lift that won't raise to locks that won't release. Tell us the make, the model and what the lift is doing.
What happens on a repair call
- On-site diagnosis of the fault
- Hydraulic repairs: cylinders, seals, hoses and power unit
- Mechanical repairs: locks, cables, chains and sheaves
- Electrical repairs on the lift: motor, switches and controls
- Anchor and levelling problems
- Parts approved by the manufacturer or built to its specs
Quoted before the work starts
A repair visit. Parts and labour depend on what the lift needs.. Call for a firm figure.
What we repair
We work on the hydraulic, mechanical and electrical side of a lift, and replace worn or broken components. Brands include Rotary, Forward, Atlas, BendPak and Direct Lift, plus most others.
Our owner, Brad Cowan, is a second-generation lift technician with 20+ years hands-on in installation, inspection and repair.
- Lift won't raise, or won't raise a load
- Lift slowly drifts down
- Locks that won't engage or won't release
- Lift rising out of level
- Motor or power unit not running
- Loose anchors
- Worn cables, chains and sheaves
- Oil leaks at cylinders, hoses and fittings
Parts that match your lift
ANSI/ALI ALIS, the North American standard for lift installation and service, says worn, damaged or broken parts are replaced with parts approved by the lift's manufacturer, or parts that meet its specs.
The same standard says no lift gets modified without the manufacturer's written permission.
When the wiring has to change
If a repair means changing the power wiring or the lift's electrical service connection, that part of the job is done by or under a licensed electrician.
What does a down bay cost you?
A lift that won't go up is a bay that isn't billing. What does a day with that bay down cost you?
We also do the annual inspection, so a repair can start from what the inspection found, before it stops the lift.
What to have ready when you call
The right person needs these details when they call you back.
- Your shop address
- Make and model of the lift
- What the lift is doing, or not doing
- Whether a vehicle is on the lift right now
- Your last inspection or service record, if you have it
Common questions
Do you repair lifts you did not install?
Yes. We repair and service vehicle lifts on pretty much any brand, including Rotary, Forward, Atlas, BendPak and Direct Lift. Tell us the make and model and what the lift is doing.
My lift won't come off its locks. Can you help?
Yes. Locks that won't release are a lift repair we handle. Call with the make and model, and tell us whether a vehicle is on the lift, so the right person has the details when they call you back.
Do you use original parts?
ANSI/ALI ALIS, the North American standard for lift installation and service, says worn, damaged or broken parts are replaced with parts approved by the original manufacturer, or parts that meet the original manufacturer's specs. That is the rule for repairs on your lift.
Can you modify my lift or add a homemade adapter?
The standard says no lift is modified without the manufacturer's express written permission, and shop-made accessories are not allowed without it either. If you need a different adapter or accessory, it has to meet the lift manufacturer's specs.
Is electrical work part of a lift repair?
Repairs to the lift's own motor, switches and controls are lift work. If the fix needs changes to the building's power wiring or the lift's electrical service connection, that part is done by or under a licensed electrician.
Related
Lift down?
Call now. Tell us the make, the model and what it's doing, so the technician comes ready for that lift.