Skip to content
Safe LiftSYSTEMS

ANSI/ALI ALOIM:2020, explained plainly

ALOIM is the industry standard for how automotive lifts are operated, inspected and maintained. Ontario's law sets the yearly examination and the signed record. ALOIM describes how the job is done properly.

Inspection and compliance / Checked

What the name means

ALOIM stands for Automotive Lift Operation, Inspection and Maintenance. It is an American National Standard published by the Automotive Lift Institute (ALI). The 2020 is the edition.

It is the recognised standard for lift inspection in North America.

What it covers

According to ALI, the standard calls for every lift to be inspected at least once a year. An inspection covers the lift's structural, mechanical, hydraulic, air and electrical systems, and produces written documentation.

  • Inspection of every lift at least once a year
  • Replacement parts that meet the original manufacturer's specifications
  • Operators trained before they use a lift

How it sits beside Ontario law

The law in Ontario is Regulation 851 under the Occupational Health and Safety Act. Section 51(1)(b) says a lifting device shall:

"be thoroughly examined by a competent person to determine its capability of handling the maximum load as rated, (i) prior to being used for the first time, and (ii) thereafter as often as necessary but not less frequently than recommended by the manufacturer and in any case, at least once a year, and a record shall be kept, signed by the competent person doing the examination"

The regulation does not name ALOIM or any certification. ALOIM is the industry standard that describes how a lift inspection is properly done.

Three ALI standards, three jobs

ALI publishes more than one lift standard. They are easy to mix up.

  • ALOIM: operating, inspecting and maintaining a lift in the shop
  • ALIS: installing and servicing a lift
  • ALCTV: how a lift model is built, tested and validated

Certified lifts and new installs

ALI's lift certification program tests lift models against ALCTV. ALI's rule is that if a lift model is not listed in its Directory of Certified Lifts, it is not certified.

Ontario's pre-start health and safety review guideline mentions "documentation that a vehicle lift or hoist is certified as meeting ANSI/ALI ALCTV-2011" and says "The Automotive Lift Institute (ALI) maintains lists of certified lifts and hoists."

Certification is not the law

ALI also certifies lift inspectors. That program is the industry gold standard. Ontario's regulation does not require it.

OSHA is an American agency and does not apply to a shop in Ontario. ALI says OSHA has no lift-specific regulation, and that neither ANSI nor OSHA certifies lifts. Treat "OSHA certified" or "ANSI certified" claims with care.

Common questions

Is ANSI/ALI ALOIM the law in Ontario?

No. It is an industry standard. The law in Ontario is Regulation 851 under the Occupational Health and Safety Act. Section 51(1)(b) calls for a lifting device to be examined at least once a year, with a signed record kept. ALOIM describes how a lift inspection is properly done.

How often does ALOIM say a lift should be inspected?

According to ALI, ANSI/ALI ALOIM calls for every lift to be inspected at least once a year. In Ontario, Regulation 851 section 51(1)(b) also says "at least once a year", and not less often than the manufacturer recommends.

What does an ALOIM inspection cover?

According to ALI, it covers the lift's structural, mechanical, hydraulic, air and electrical systems, and produces written documentation. The standard also covers replacement parts and operator training.

Is a lift that says "OSHA certified" or "ANSI certified" certified?

ALI says neither OSHA nor ANSI certifies lifts, so those claims don't mean the lift is certified. ALI's rule is that a lift model is certified only if it is listed in ALI's Directory of Certified Lifts. OSHA is American and does not apply in Ontario.

Do your inspections follow ALOIM:2020?

Yes. Our inspections follow ANSI/ALI ALOIM:2020. One visit covers every lift in the shop, and each lift is inspected and recorded separately. Call 416-771-0499 to book.

Sticker running out?

Book your annual inspection. We inspect every lift in the shop in one visit, with a signed record for each.