Putting a lift into a Scarborough building, old or new
A post-war plant on the Golden Mile and a new industrial condo need very different install plans. We check the floor, the height and the power in your Scarborough unit before we quote, and we install lifts bought elsewhere.
Post-war floors
The City's Golden Mile report says the area became the "Golden Mile of Industry" after the Second World War, with large manufacturing buildings along Eglinton Avenue East. Many were replaced by big commercial buildings in the 1990s.
An old plant floor was poured for machines, not lift anchors. It may be thick in one spot and thin or patched in another. We check the lift maker's minimum slab spec against the concrete where the lift will actually stand.
If the floor fails, options include a freestanding four-post, a scissor lift or a new engineered pad.
The Golden Mile is changing again. Its 2020 Secondary Plan looks ahead to about 19,000 jobs over 20 or more years, in tall, mid and low-rise buildings. A newer building brings newer floors, so an install there starts with the building's drawings and specs.
Smaller units and industrial condos
A 2021 City report on Coronation Drive says demand for industrial space is high and names industrial condominiums as one way to add smaller light industrial space.
Smaller units bring their own limits: a shared wall, a lower ceiling in the front, a door that sets how a vehicle turns in. Condo rules can also limit drilling and wiring. Get approval from the condo board or landlord before we set a date.
Measure the real height
Usable height is the distance from the floor to the lowest thing over the lift. That could be a unit heater, a sprinkler line, a light or the track of an overhead door.
Clearfloor two-posts need the most. If you come up short, a baseplate two-post, a low-rise or a four-post may still do the job. We measure before we recommend.
- Lowest overhead obstruction above the lift
- Door height and track position
- Floor slope toward drains
- Distance to walls, columns and benches
- Power supply near the bay
Zoning before you sign
Automotive work isn't allowed everywhere. In the Coronation Drive area, the City's 2021 report says the heavy industrial zone permits vehicle depots and repair shops, and the employment industrial zone permits vehicle service facilities such as repair shops.
Check the zoning for your exact address before you lease. We can't approve a use, but we can tell you what the lift itself needs.
Rules differ from one part of Scarborough to the next. Don't assume what's allowed near Coronation Drive also applies in Milliken or along the 401.
Permits, power and lifts from elsewhere
Building permits and electrical work are not part of our install, which is normal in this trade. We give your electrician the lift's power needs.
Moving a lift from your old shop, or bought one from another seller? We install lifts bought elsewhere. Send the make, model and manual. Ontario Regulation 851, section 51(1)(b), calls for an exam "prior to being used for the first time", and we can book it with the install.
Common questions
Can a lift go into an old Scarborough factory floor?
Often, yes, once we check the concrete where the lift will stand against the lift maker's spec. If the slab isn't right, a freestanding lift or a new engineered pad can solve it.
Do you install lifts in industrial condo units?
Yes, once the condo board or landlord approves anchors and wiring. We give you the lift's slab, height and power needs so you can get that approval first.
Will you move my lift from my old shop?
We install lifts bought or brought from elsewhere. Tell us the make, model and age, and send the manual if you have it. We check it suits the new bay before we book the job.
Who handles the permit and the wiring?
You and your electrician. Building permits and electrical work are not part of our install, which is normal in this trade. We supply the lift's requirements.
Should you see the unit before I order a lift?
Yes, ideally. A site check tells us the real height, the state of the slab and the power at the bay. That keeps you from ordering a lift your Scarborough unit can't take.
Keep reading
Pricing a new lift?
Send your ceiling height and what you work on. You get one price for the lift, delivery and install.