Installing a lift in a North York unit that wasn't built for one
Most North York units were built for something other than your lift. We check the slab, the clear height and the power before we quote, and we install lifts you bought from someone else.
Few empty units to choose from
Industrial space in North York is tight. The City's profiles put 2021 vacancy at 0.7% in the Highway 400 area, 0.8% in Downsview and 1.6% in Caledonia-South Downsview.
With so little on the market, you often take the unit that's free and make the lift fit. That is why we look at the building before we pick the lift.
- Clear height to the lowest pipe, duct, light, heater or door track
- Slab thickness and condition where the lift will stand
- Bay width and length, with room to open doors and walk around
- Power available at the bay
- Where the vehicle enters, and how it turns in
Converted buildings and clear height
The City says some older factories and warehouses in Caledonia-South Downsview have become showrooms or stores. Buildings that change use pick up new ceilings, ducts, lights and sprinklers along the way.
We measure from the floor to the lowest thing above the lift, not to the roof. A tall clearfloor two-post needs the most room. If height runs short, a baseplate two-post, a four-post or a low-rise lift may still work.
Checking the concrete
Every lift maker sets a minimum slab thickness and concrete strength for its anchors. We check your exact model's spec against your floor before anyone drills.
A floor that held racking, a showroom or a warehouse aisle may not be right for anchors. If it isn't, a freestanding four-post, a scissor lift or a new engineered pad are the usual answers.
Cracks, patched trenches and old anchor holes near the bay all matter. We look for them before we mark where the lift goes.
Planning around a working shop
You don't always get to shut down for an install. When the TTC approved new hoists for its Wilson Bus Garage in 2024, it planned the work two hoists at a time over about 27 months to keep the garage running.
Your job is smaller, but the idea holds. Tell us which bays must stay open and we plan the install around them. A slow day of the week helps too.
Leases, permits and power
If you lease, get your landlord's written OK for anchors and wiring before you order. We give you the lift's slab, height and power needs so you have something concrete to show them.
Our install work doesn't include building permits or electrical work, which is normal in this trade. We give your electrician the lift's power requirements.
Lifts bought somewhere else
Bought a lift online, from a closing shop or from another seller? We install lifts bought elsewhere. Send the make, model and install manual, and we check it against your unit.
Ontario Regulation 851, section 51(1)(b), calls for a thorough examination by a competent person "prior to being used for the first time". We inspect lifts too, so we can book that exam with the install.
Common questions
Can you install a lift in a converted North York building?
Usually, yes. We measure the usable height, check the slab against the lift maker's spec and confirm the power. If the lift you want won't fit, we suggest one that will.
I lease my unit near Highway 400. What does my landlord need to know?
That the lift will be anchored to the slab and needs its own power supply. We give you the lift's slab, height and power needs in writing so your landlord can approve them.
Will you install a lift I already bought?
Yes. Send us the make, model and manual. We check that it suits your bay and your floor, then book the install.
Does your install include the electrical work?
No. Building permits and electrical work are not part of our install, which is normal in this trade. We tell your electrician exactly what the lift needs.
Should I sign the lease before you look at the unit?
If you can, have us look first. Height, slab and power decide which lifts fit. In a market this tight, knowing that before you sign can save you from a unit that won't take the lift your work needs.
Keep reading
Pricing a new lift?
Send your ceiling height and what you work on. You get one price for the lift, delivery and install.