Skip to content
Safe LiftSYSTEMS

Choosing a lift for North York work and North York buildings

A van fleet near the 400, a repair shop in Downsview and a delivery bay off Caledonia Road each need a different lift. We sell and install lifts that fit the work and the unit.

Questions we ask first

The right lift comes from your jobs and your building, not a brochure. We start with a few questions, then narrow the list.

Our own crew installs what we sell, so one company takes you from the quote to a working lift.

  • What you lift most, and the heaviest vehicle you lift
  • Longest wheelbase in your fleet
  • How many bays, and how many jobs a bay does in a day
  • Clear height, slab thickness and power, if you know them
  • Own or lease, and what your landlord allows
  • Any old lift you want gone

Distribution fleets in the Highway 400 area

The City describes the Highway 400 area as manufacturing plus many large distribution centres. In-house fleet bays there see vans, box trucks and yard trucks.

Heavy-duty two-posts, drive-on four-posts and mobile column sets are the usual picks. Mobile columns don't anchor to the floor, which suits a leased unit. Compare lifts on axle load and wheelbase range, not just total capacity.

Repair shops in Downsview

Downsview's profile lists manufacturing, warehousing, business services and showrooms, and the Duke Heights BIA speaks for over 2,500 businesses. That is a lot of vehicles needing brakes, tires and service close to work.

A general repair shop usually starts with two-posts for most jobs and a four-post for alignments and oil changes. Dealers should check whether their vehicle maker names equipment for certain bays before ordering.

Delivery vans in Caledonia-South Downsview

The City notes a critical mass of furniture, home furnishings and decor businesses here. Those businesses run delivery vans and trucks, and some keep a bay to look after them.

Where a showroom or warehouse gave up part of its floor for a service bay, the slab and ceiling decide the lift. A scissor or low-rise lift can work where height is short.

Long delivery vans also need bay length. Measure from the door to the back wall before you shortlist a four-post.

Heavy lifts, and a public example

Bus and truck lifting is its own class. When the TTC replaced hoists at its Wilson Bus Garage, it chose in-ground cylinder post-type hoists in cassettes, rated for the new electric buses arriving in 2024 and 2025.

Most shops won't need an in-ground system. The point is that heavier, newer vehicles can change which lift is right. Ask about battery-electric weight before you buy, and we'll check axle loads with you.

Trade-ins and lifts you found

Replacing a worn lift? We look at trade-ins case by case. Found a used lift you like? We install lifts bought elsewhere, and we'll tell you honestly whether it suits your bay.

Before you pay for a used lift, send us the make, model and photos of the data plate. Check that the manual and all the parts come with it. A lift missing its arms, locks or controls can cost more to finish than it saved.

New or used, Ontario Regulation 851 calls for an exam before a lift is first put to work. We can do that on install day.

Common questions

What lift suits a van fleet in North York?

It depends on the vans and your unit. Heavy-duty two-posts, drive-on four-posts and mobile columns are common picks. We check wheelbase, axle weight, clear height and slab before we recommend one.

Do you take trade-ins?

Yes, case by case. Tell us the make, model and rough age of the lift you're replacing, and we look at it when we quote.

Can I buy a lift that doesn't need anchors?

Yes. Mobile column lifts and freestanding four-posts don't anchor into the slab. They suit leased units where the landlord won't allow drilling.

Do you install what you sell?

Yes. Our own crew installs the lifts we sell, after we check the slab, ceiling height and power in your North York unit.

We're a dealership. Can we choose any lift?

Not always. Some vehicle makers run equipment programs that name the equipment for certain bays. Check with your manufacturer first. For the bays outside those programs, the choice is yours, and we help you make it.

Pricing a new lift?

Send your ceiling height and what you work on. You get one price for the lift, delivery and install.