BendPak 10APX two-post lift
A 10,000 lb clearfloor two-post for cars, SUVs and half-ton pickups. It is rated for 5,000 lb on either axle and 2,500 lb on any one arm.
10,000lb
We sell, install, inspect and service this lift
Get this lift installedSpecifications
From the manufacturer's published data. Confirm against the current spec sheet before ordering.
| Rated capacity | 10,000lb |
|---|---|
| Max front axle | 5,000lb |
| Max rear axle | 5,000lb |
| Max per arm | 2,500lb |
| Overall height | 157in |
|---|---|
| Max rise, including pad | 79.5in |
| Min. pad height | 4in |
| Overall width | 135 or 145 in |
| Drive-through clearance | 92 or 102 in |
| Column spacing, inside | 108.5 or 118.5 in |
| Column spacing, outside | 127.5 or 137.5 in |
| Front arm reach | 24.5 to 50 in |
| Rear arm reach | 32 to 59.25 in |
| Min. slab | Not yet confirmed |
|---|---|
| Anchoring | Anchored |
| Power | 220 V, 60 Hz, 1 phase |
|---|---|
| Rise time | 45seconds |
| Amps and breaker | Not yet confirmed |
- Bi-Metric triple-telescoping arms for symmetric or asymmetric loading
- Clearfloor design with an overhead beam
- Taller versions available for high vehicles
Installed price
Installed price quoted as one number
Lift, delivery and installation. Call or send your bay details for a firm figure.
Before you buy
Spec sheet
A printable one-pager with the specs and bay requirements.
Pricing a new lift?
Send your ceiling height and what you work on. You get one price for the lift, delivery and install.