Bron BR-P6000S pit parking lift
A two-post pit lift that parks one car below the floor and one above. Either car can come out without moving the other.
We sell, install, inspect and service this lift
Get this lift installedSpecifications
From the manufacturer's published data. Confirm against the current spec sheet before ordering.
| Platform capacity | 6,000lb |
|---|---|
| Cars | 2 |
| Car size limit | 5,000 mm long, 2,050 mm wide |
| Car heights | Upper + lower = clear height less about 180 mm |
|---|---|
| Pit length | 5,300 mm |
| Pit width | 2,550 to 2,750 mm |
| Pit depth | Sets the split between upper and lower car |
| Pit concrete | At least 300 mm thick, C30 |
|---|---|
| Anchors | M20 adhesive anchors, 250 mm |
| Drainage pit | 500 x 500 x 200 mm |
| Power | 220 V, 60 Hz, 1 phase |
|---|---|
| Power pack | 3.0 kW or 5.5 kW |
| Rise and lower time | 30 s up, 25 s down |
- Independent access to both cars
- A pit buys independent access and a clear floor, not room for taller cars
- TUV compliant to EN 14010, with a CSA-approved power unit
- In Ontario it is a TSSA-regulated elevating device under O. Reg. 209/01. The install has to be done by a TSSA-registered elevating devices contractor.
Installed price
Installed price quoted as one number
Lift, delivery and installation. Call or send your bay details for a firm figure.
Before you buy
Spec sheet
A printable one-pager with the specs and bay requirements.
Pricing a new lift?
Send your ceiling height and what you work on. You get one price for the lift, delivery and install.