BendPak PL-6000DC parking lift
A two-post parking lift that stacks one car over another. Add-on units share a column, so a row takes less width.
6,000lb
We sell, install, inspect and service this lift
Get this lift installedSpecifications
From the manufacturer's published data. Confirm against the current spec sheet before ordering.
| Platform capacity | 6,000lb |
|---|
| Total width | 100.25in |
|---|---|
| Post centre to centre | 93.75in |
| Post height | 131in |
| Post height, with chain adjustment | 133.25in |
| Overall length | 163.5in |
| Usable platform | 82.5 in wide, 146 in long |
| Rise | 82.5in |
| Lock positions | 10, from 45 to 80.4 in |
| Wider version | PL-6000DCX, 112 in total width |
| Above the upper car | At least 6 in to the ceiling or any obstruction |
|---|---|
| Min. slab | 6in |
| Concrete | Steel reinforced, 4,350 PSI, 28-day cure |
| Suspended slab | Architect and BendPak approval in writing |
| Location | Indoor only |
| Power | 208 to 240 V, 50/60 Hz, 1 phase, 4 HP, 22 A |
|---|---|
| Breaker | Separate breaker per lift |
| Rise and lower time | 50 s up, 45 s down |
- Add-on units share a column to save width in a row
- Mechanical locks every 4 in
- Dependent: the bottom car moves out before the top one comes down
- In Ontario it is a TSSA-regulated elevating device under O. Reg. 209/01. The install has to be done by a TSSA-registered elevating devices contractor.
Installed price
Installed price quoted as one number
Lift, delivery and installation. Call or send your bay details for a firm figure.
Before you buy
Spec sheet
A printable one-pager with the specs and bay requirements.
Pricing a new lift?
Send your ceiling height and what you work on. You get one price for the lift, delivery and install.