Skip to content
Safe LiftSYSTEMS

BendPak Autostacker A6S parking lift

A scissor-style stacker that turns one parking space into two. Nothing sits above the raised platform, so the car roof is the highest point.

6,000lb

We sell, install, inspect and service this lift

Get this lift installed

Specifications

From the manufacturer's published data. Confirm against the current spec sheet before ordering.

CapacityAutostacker A6S
Platform capacity6,000lb
Dimensions
Total width103in
Platform width83.75in
Drive-through between legs83in
Overall length144in
Max wheelbase132in
Ramp height2in
Underclearance at locks52.5, 60.75, 68.5, 75 and 81.25 in
Wider versionA6W, 111 in total width
Site requirements
CeilingVehicle on platform + 6 in + lock height
Min. slab4.25in
Concrete strength3,000 PSI, 28-day cure
Anchors3/4 in wedge anchors, 4 in deep
LocationIndoor only
Power and operation
Power208 to 230 V, 60 Hz, 1 phase, 22 A
Breaker, 220 V25A
Rise and lower time55 s up, 35 s down
Multi-unitOne master power unit runs up to 12 lifts, one at a time
  • No posts or beam above the raised platform
  • Five lock heights to match the car parked below
  • Dependent: the lower car moves out before the platform comes down
  • In Ontario it is a TSSA-regulated elevating device under O. Reg. 209/01. The install has to be done by a TSSA-registered elevating devices contractor.

Installed price

Installed price quoted as one number

Lift, delivery and installation. Call or send your bay details for a firm figure.

Spec sheet

A printable one-pager with the specs and bay requirements.

Or call 416-771-0499

Pricing a new lift?

Send your ceiling height and what you work on. You get one price for the lift, delivery and install.