Skip to content
Safe LiftSYSTEMS

Low-rise and mid-rise lifts for wheels, brakes and body work

A low-rise or mid-rise lift brings the car to working height fast, with no columns. It suits tire shops, body shops and detailers.

6,000–7,000lb

Get a quote

Who they are for

Low-rise lifts suit tire, brake, wheel and quick-service work. Mid-rise lifts suit body shops, detail and light service where ceiling and floor space are both tight.

A portable model suits detailers, wrap shops and mobile techs.

How they work

A scissor mechanism lifts the car on pads or a platform. There are no columns and no overhead beam. You work at a comfortable height, not standing under the car.

If you need full standing access underneath, look at a two-post or a full-rise scissor.

Portable, surface mount or flush mount

The Atlas Versalift is freestanding and portable. It sits 4.1 in off the floor and lifts to 39.4 in, with no anchoring.

The BendPak MDS-6 mid-rise comes in surface-mount or flush-mount styles. Flush mount means cutting a pit so the lift sits level with the floor.

What your bay needs

Measure to the lowest thing overhead. Final numbers come from the spec sheet of the exact model.

Bay requirements
Height range, Atlas Versalift4.1 to 39.4 in
Footprint, Atlas Versalift102.4 x 45.3 in
Power, Atlas Versalift220 V, 12 V or air
Anchoring, Atlas VersaliftNone
SlabNot yet confirmed
Ceiling, mid-riseNot yet confirmed

Before install day

  • A portable lift like the Atlas Versalift needs no anchoring, which suits a leased space.
  • A flush-mount lift needs a pit cut into the floor, with drainage.
  • A surface-mount lift needs no concrete work.
  • Building permits and electrical work are separate from our install.

Installed price quoted as one number

The lift, delivered and set up or installed. Pit work, building permits and electrical work are quoted separately.. Call or send your bay details for a firm figure.

Compared with the alternatives

Low-rise and mid-rise lifts compared with Scissor lifts and Two-post lifts
Low-rise and mid-rise liftsScissor liftsTwo-post lifts
Best forTires, brakes, body and detailBays that can't take columnsGeneral repair, cars and light trucks
Typical capacity6,000 to 7,000 lb7,000 to 9,000 lb7,000 to 12,000 lb
Ceiling neededLow; Versalift tops 39.4 inTo confirm per modelAbout 12 to 13 ft clearfloor
Underbody accessWorking height, not standing roomGood; centre partly blockedFull, wheels hang free
Floor spaceCompact; Versalift 102 x 45 inCompact; ramps or flushAbout 11 to 12 ft wide
Anchoring and slabPortable, surface or flushSurface, or flush in a pitAnchored, 4-1/4 in at 10,000 lb

Common questions

What is the difference between a low-rise and a mid-rise lift?

A low-rise lift is for tire, brake and wheel work and quick service. A mid-rise lift raises the car higher for body work, detail and light service, and suits bays where ceiling and floor space are both tight.

Can I use a mid-rise lift in a leased shop?

A portable model can work. The Atlas Versalift is freestanding with no anchoring and runs on 220 V, 12 V or an air-hydraulic pump. Check your lease before choosing a flush-mount lift, which needs a pit.

How much weight can a mid-rise lift take?

It depends on the model. The BendPak MDS-6 lifts up to 6,000 lb and the Atlas Versalift up to 7,000 lb.

Pricing a new lift?

Send your ceiling height and what you work on. You get one price for the lift, delivery and install.