Skip to content
Safe LiftSYSTEMS

Alignment lifts: the level floor your aligner needs

An aligner only measures. It needs a lift that holds the vehicle level, every time, with the wheels free to move.

9,000–18,000lb

Get a quote

Who needs an alignment lift

Any shop adding wheel alignment, and any shop planning static ADAS calibration. We always look at the aligner and the lift together.

Your options

A four-post alignment rack has front turnplates and rear slip plates on longer runways. An alignment scissor does the same job in a smaller footprint. A flush-mounted in-ground lift is a third option.

If you already own a suitable four-post, a bolt-on alignment kit can sometimes convert it.

Level is a floor problem

An alignment rack is only as good as its level. It must be installed dead level within the aligner maker's tolerance. That can mean shimming, or a new pour.

A rack shimmed and levelled at install gives static ADAS work a flat, level surface without tearing up your concrete.

Choosing between options

Tight on bay space? Look at an alignment scissor. Doing trucks? Look at an 18,000 lb rack like the Rotary AR18 or BendPak HDS-18EA. Match runway length to the longest vehicle you align.

What your bay needs

Measure to the lowest thing overhead. Final numbers come from the spec sheet of the exact model.

Bay requirements
Floor levelAligner maker's tolerance
CeilingNot yet confirmed
Runway lengthNot yet confirmed
Slab, most BendPak four-posts4-1/4 in, 3,000 PSI
PowerNot yet confirmed

Before install day

  • Alignment racks are usually anchored and must be installed dead level within the aligner maker's tolerance.
  • An uneven floor can mean shimming or a new pour. We check the floor before you order.
  • BendPak lists most four-posts at 4-1/4 in minimum slab. It flags the HDSO-14 floor as needing to be properly aged to American Concrete Institute specs.
  • A bolt-on alignment kit has to fit your exact lift. We confirm that first.
  • Building permits and electrical work are separate from our install.

Installed price quoted as one number

The lift, installed and levelled. Aligner, floor levelling pours, building permits and electrical work are quoted separately.. Call or send your bay details for a firm figure.

Compared with the alternatives

Alignment racks compared with Four-post lifts and Scissor lifts
Alignment racksFour-post liftsScissor lifts
Best forAlignment and static ADAS workStorage and drive-on serviceBays that can't take columns
Typical capacity9,000 to 18,000 lb7,000 to 18,000 lb7,000 to 9,000 lb
Ceiling neededTo confirm per modelColumns plus the car on topTo confirm per model
Underbody accessWheels on turnplates and slip platesWheels on runways; jacks free themGood; centre partly blocked
Floor spaceLong runways; scissor is smallerLongest; count the rampsCompact; ramps or flush
Anchoring and slabUsually anchored, dead levelSome freestanding; 4-1/4 in commonSurface, or flush in a pit

Common questions

Do I need a special lift for a wheel aligner?

Yes. An aligner only measures, so it needs a four-post alignment rack, an alignment scissor lift or a flush-mounted in-ground lift. Each holds the vehicle on a level, repeatable surface with the wheels free to move.

Can I convert my four-post into an alignment rack?

Sometimes. A bolt-on kit, like the Atlas Platinum alignment kit, can convert a suitable four-post. It has to fit your exact lift, so we confirm that first.

Does an alignment rack help with ADAS calibration?

Static ADAS calibration needs a flat, level reference surface. A rack shimmed and levelled at install gives you that without tearing up your concrete. ADAS targets are also placed off the vehicle's thrust line, which the aligner measures.

Alignment scissor or four-post rack?

Both do alignment with turnplates and slip plates. An alignment scissor takes a smaller footprint than a four-post rack, which helps where bay space is tight.

Pricing a new lift?

Send your ceiling height and what you work on. You get one price for the lift, delivery and install.