Heavy-duty lifts for box trucks and fleet vehicles
Box trucks, medium-duty and fleet vehicles need 15,000 lb and up. A heavier lift brings a thicker slab and a taller machine with it.
15,000–30,000lb
Who a heavy-duty lift is for
Fleets, box truck and medium-duty work, municipal garages and truck shops. Size the lift for your heaviest regular vehicle, not your average one.
Your options
Heavy two-posts run from 15,000 lb, like the BendPak XPR-15CL and Challenger CHL15000, up to 20,000 lb on the Rotary SPO20 and BendPak 20AP. Heavy four-posts run to 30,000 lb on the Rotary SM30.
At 20,000 lb and over, mobile columns or a heavy four-post often make more sense than a two-post.
What your bay needs
BendPak's 15,000 and 18,000 lb two-posts need a slab at least 8 in thick. The BendPak 16AP and 20AP stand about 14 ft tall, and their taller versions about 16 ft.
Measure to the lowest thing overhead, like heaters, lights or door tracks, and check the door opening.
Watch the axle limits
Capacity is a total. Every lift also has per-axle and per-arm limits. A heavy truck can be under the total and still over on one axle, so we check your vehicle weights against the spec.
What your bay needs
Measure to the lowest thing overhead. Final numbers come from the spec sheet of the exact model.
| Slab, BendPak 15,000 and 18,000 lb | 8 in, 3,000 PSI |
|---|---|
| Height, BendPak 16AP and 20AP | About 14 ft |
| Height, taller 16AP and 20AP | About 16 ft |
| Bay width and drive-through | Not yet confirmed |
| Power | Not yet confirmed |
Before install day
- BendPak calls for 8 in of 3,000 PSI concrete, aged 28 days, under its XPR-15 and XPR-18. We check your slab first.
- If the slab is too thin, a new engineered pad for the columns or a set of mobile columns can be the answer.
- Anchors go at least 6 in from any seam, control joint or crack on BendPak's spec.
- Amps and breaker size come from the lift's manual. Wiring is a job for a licensed electrician, arranged separately.
- Building permits are separate from our install.
Installed price quoted as one number
The lift and our installation with anchors. Concrete work, building permits and electrical work are quoted separately.. Call or send your bay details for a firm figure.
Compared with the alternatives
| Heavy-duty truck lifts | Mobile column lifts | Two-post lifts | In-ground lifts | |
|---|---|---|---|---|
| Best for | Box trucks, medium duty, fleets | Buses, heavy trucks, fleets | General repair, cars and light trucks | Dealers and express service |
| Typical capacity | 15,000 to 30,000 lb | 18,000 lb per column | 7,000 to 12,000 lb | To confirm per model |
| Ceiling needed | About 14 to 16 ft two-post | No overhead beam | About 12 to 13 ft clearfloor | To confirm per model |
| Underbody access | Full on a two-post | Open between the columns | Full, wheels hang free | To confirm per model |
| Floor space | To confirm per model | Bay back when rolled away | About 11 to 12 ft wide | Clear bay when down |
| Anchoring and slab | Anchored, 8 in at 15,000 lb | None; slab carries wheel loads | Anchored, 4-1/4 in at 10,000 lb | Excavation and concrete work |
Models we work with
BendPak XPR-15CL and XPR-18CL
We sell, install and serviceClearfloor two-posts for medium-duty trucks, box trucks and fleet work.
| Capacity | 15,000 or 18,000 lb |
|---|---|
| Min. slab | 8in |
| Overall height | Not yet confirmed |
BendPak 16AP and 20AP
We sell, install and serviceHeavy-duty clearfloor two-posts for heavy trucks and commercial vehicles.
| Capacity | 16,000 or 20,000 lb |
|---|---|
| Overall height | About 14 ft |
| Taller versions | About 16 ft |
| Min. slab | Not yet confirmed |
Rotary SPO20
We sell, install and serviceA 20,000 lb two-post for heavy trucks and fleet work.
| Capacity | 20,000lb |
|---|---|
| Overall height | Not yet confirmed |
| Min. slab | Not yet confirmed |
Rotary SM30
We sell, install and serviceA 30,000 lb drive-on four-post for heavy vehicles.
| Capacity | 30,000lb |
|---|---|
| Runway length | Not yet confirmed |
| Min. slab | Not yet confirmed |
Common questions
How thick does my slab need to be for a 15,000 lb lift?
BendPak's spec for its XPR-15 and XPR-18 two-posts is at least 8 in of 3,000 PSI concrete, aged 28 days. Every maker publishes its own numbers, so we check the spec for the exact lift before anything is drilled.
How tall is a heavy-duty two-post lift?
The BendPak 16AP and 20AP stand about 14 ft tall, and their taller versions about 16 ft. Your ceiling has to clear that, measured to the lowest obstruction over the lift.
Two-post, four-post or mobile columns for heavy trucks?
A 15,000 to 20,000 lb two-post gives full access under medium-duty trucks. At 20,000 lb and over, mobile columns or a heavy four-post like the 30,000 lb Rotary SM30 often make more sense. Columns need no anchoring and roll away.
What capacity do I need for box trucks?
Fleets with box trucks and medium-duty vehicles usually look at 15,000 or 18,000 lb. Check per-axle limits as well as the total.
Related
Pricing a new lift?
Send your ceiling height and what you work on. You get one price for the lift, delivery and install.