Every bay in one quote
Outfitting several bays at once is one job, not five. We quote every lift together and plan the installs together.
- 1 to 2 bays
- One good two-post
- 3 to 6 bays
- A two-post core plus one specialty lift
- 7 bays and up
- Standard bays and an inspection program
Bay count sets the plan
How many bays you run changes what makes sense. A small shop needs the right lift. A big shop needs the same lift, bay after bay, and a plan to keep them all inspected.
- 1 to 2 bays: one good two-post. Don't over-spec it.
- 3 to 6 bays: a two-post core, plus one specialty lift such as a scissor or an alignment lift.
- 7 bays and up: standardise the bays and put every lift on an inspection program.
Your vehicles set the capacity
Size each bay for the heaviest vehicle that rolls in on a normal week, not the lightest.
A bigger lift can mean a concrete conversation. BendPak's published minimum is 6-1/2 inches of concrete for its 12,000 lb two-post, and 8 inches for its 15,000 and 18,000 lb models. Each maker publishes its own numbers.
- Cars, crossovers and half-tons: 10,000 lb
- 3/4-ton and 1-ton diesels, big vans: 12,000 lb
- Cube vans, box trucks and medium duty: 15,000 to 18,000 lb
- Heavy trucks and buses: mobile columns, or a heavy-duty four-post or in-ground lift
One site visit checks every bay
Ceiling height, the slab and the power decide which lift fits each bay. We check them for every bay before we quote, so nothing turns up on install day.
A thin slab, a low ceiling or a leased floor doesn't always end the plan. A freestanding four-post, a floorplate two-post or a scissor lift can often fit where a clearfloor two-post can't.
Every lift needs its yearly exam
Ontario Regulation 851, section 51(1)(b), says a lifting device shall be examined "at least once a year, and a record shall be kept, signed by the competent person doing the examination".
When we come to inspect, we inspect every lift in the shop in the same visit. Each lift is inspected on its own and gets its own signed record.
What to send us
These details let us scope the quote.
- How many bays, and what each bay will do
- Your heaviest regular vehicle
- Clear ceiling height at each bay
- Slab thickness and age, if you know them
- Power at each bay: single or three-phase
- Whether you own or lease the building
Common questions
Do all my bays need the same lift?
Not in a small shop. With 3 to 6 bays, most shops run a two-post core plus one specialty lift, such as a scissor or an alignment lift. At 7 bays and up, standard bays make more sense, with every lift on one inspection program.
Can every lift be inspected in one visit?
Yes. We inspect every lift in the shop in the same visit. Each lift is inspected on its own and gets its own signed record.
Does a heavier lift need thicker concrete?
Often, yes. BendPak's published minimum is 4-1/4 inches for its 7,000 to 10,000 lb two-posts, 6-1/2 inches at 12,000 lb, and 8 inches at 15,000 and 18,000 lb. Every maker publishes its own numbers, so we check the spec for the exact lift before anything is drilled.
Are permits and electrical part of the install?
No. Our lift installation work doesn't include building permits or electrical work, which is normal in this trade. We tell you what power each lift needs, so your licensed electrician knows what to prepare.
Related
Pricing a new lift?
Send your ceiling height and what you work on. You get one price for the lift, delivery and install.